extrusion systems.

Product Line reviewed by ADDEX
Complete blown film line in the United States (
Up to 9 layers)
, Mold, gas ring, automatic thickness control, IBC system, oscillating transport device, hoist, feed screw and extruder.
Patented internal thickness control (IGC)
Automatic film correction using IBC\'s airfrom-
Change in thickness.
CompactGauge band random generator (GBR)
The oscillating hauloff is suitable for the height of the low ceiling of Forester fits. REDi (
Regular Division)
Monthly output dietechnoology-
The film thickness is 25% lower.
Super wind surface/Center auxiliary winding machine with reverse winding capacity up to 58-in. diam. rolls.
Advanced extruder technology offers superior series Single
Screw extruder and system for piping, profiles, foam, film and sheet, online Wood/plastic composite and extrusion, and online thermoforming, recycling and melting. AL-
BE industrial company
Single standard line-
Screw Extruder (0. 75-to 2. 5-in. diam. )and custom-
Up to 8 design units.
There are double layers.
Inner lining barrel up to 32: 1 L/D. High-
The capacity thrust housing provides long bearing life.
The auxiliary equipment includes a vacuum ruler and a cooling tank for piping, ball and custom profiles, a tractor, a cut-off saw, a reel and a mold.
Alpha marathon Technology Co. , Ltd.
Direct extrusion provided-
Line bubble forming machine for making bubble packaging from film width to 124 in.
Can provide line speed up to 100 m/min;
And a multi-functional laminating machine that can produce layers of four materials at the same time: Foam, Poly, copper paper, coated aluminum foil. Single-
1-screw extruderto 6-in. diam.
Features include air or water cooling, three-speed gear reducer, metal barrel, groove or smooth feeding section.
Up to five layers of single-layer and co-extrusion spiral molds with flow mixing channels with greater thermal dispersion, lower dwell time and minimal instrument variation.
Stationary, rotating or oscillating systems are available. Low-
Die stacking (2000-3000 psi)
Extrusion application of five-
Plus layer with double proportional heart design and diamond-type mixer.
Downstream equipment includes top nips, secondary-
Components, surface winding machines and transverse filmoscillators (HFO). Top-
The Nip component options include the folding frame and the corner support assembly.
The line speed is 500/min from manual mode to fully automatic mode. ALTECH USA INC.
The Japanese trading company provides the timber/plastic extrusion equipment of CTE company. Ltd. in Japan.
The CTE technology has a short and a side-by-side screw from a double
Twist the kneader into one-screw extruder.
American extrusion serviceOffers single-
For pipe/profile, plate and casters, series foam production line and double-
Diameter recovery extruder.
American Jet Corporation
Plastimac from Italy provides a complete blown film extrusion system for high-density polyethylene, llannan and low-density polyethylene.
KUHNE, USA
Horizontal, vertical and all types of co-
Extruder for all extrusion applications.
Complete extrusion production line for pipes, profiles and plates.
Rubber and silicone extruder for all applications except tires.
RamStuffer extruder for light stacking density recovery and reprocessing.
Flight attendant barrier screws for high-quality, high-
Output performance of all resins and extrusion processes.
Screw size from 0. 75 to 10 in.
In any letter of credit that has been applied and has not been applied.
MAPLAN, USATwin-
Screw extrusion system for rigid PVC pipes, siding and profiles, including three cones and six parallel pairs-
Screw extruder: two products: Con 40, BEX 54 and DSK 62;
Similar to BEX 92, TS 100/2, TS 92, TS 110, TS 135, and BEX 168. Single-
Screw extrusion system for manufacture of polyethylene with 30: 1 L/D extruder from 45 to 220mm
Extrusion output rate from 100 to lb/h.
Natural fiber composite extrusion system is available for all extruder types.
Tooling for PVC and PVC pipes starting from 0. 5 to 63 in.
In addition, complete tools are provided for siding, profiles, fences, decks and natural fiber composites.
Complete downstream systems for all product lines.
Complete the new or reconstructed barrel and screw program.
The chip system provides various stack configurations, it can be used for various thermoplastic polymers, engineering polymers and natural fiber composites PS and PVC including PET, PE, PP, natural fiber composites, PC.
AMUT North American parallel pairs-
PVC and single screw extruder
Screw Extruder system for pipe, pipe, profile, plate and calender.
New extrusion process of PEXb (silane-crosslinked PE)small-diameter pipe. ASHLAND-TECH INC.
Complete extrusion production line with patented compactor and double bellows
Wall tooling system;
-Inner blown film system
Line bag making and conversion equipment with automatic packaging;
Recycling and ball making systems. Custom-
Design tools and extruder from 0. 75-to 18-in. diam.
See composite/hybrid systems for B & P process equipment and systems.
Luigi bandera spa costrzioni MECCANICHE provides a complete multi-layer production line for PET sheets, blown films, streaming films, pipes and profiles.
Gloucester Engineering, INC.
Complete extrusion system for single and multi-layer blown film, cast film, rigid sheet and foam sheet.
In addition, extrusion coating, control system and interioror out-of-
Line three ya system.
Recycling system and granulator, downstream equipment, hoist, printer and gravity measurement.
BAUSANO Group SpA supplies double cylinder side by side
Screw extruder and complete system for extrusion of \"polywood\" sheet or profile or compound of thermoplastic plastic mixed with sawdust, Hull and paper etc.
BERLYN extruderSingle-
Screw extruder from 0. 75-to 15-in. diam.
All L/Dratios;
Filter and screen changer including slides
Plate, continuous and automatic type;
Stock mold, water bath, air stripping machine and granulator as well as underwater grain cutting system to 6000/hour; melt gearpumps;
Flat line to 108.
Width and all thickness.
The outline of the pipe, pipe and complex structural parts. Single-
The screw recovery extrusion system consists of granulator, vertical spiral feeder, 50: 1 barrel, double
Sliding cover ventilation system
Disc mesh changer and/or continuous filters, stock and underwater granulator.
Productivity goes from 100/hour to 10,000/hour. PLC-
Control System is available.
BERSTORFF crown, twin room
Screw compound extruder and ball system; twin-
Screw composite for direct input
Film and wire sheet of reinforced plastic; single-and twin-
Pre-volatile and special application of screw extruderand single-
Screw extrusion system from mixed recycling. (
See composite/hybrid systems. )
Davis-black Clausen conversion machinery
Standard film and coating system.
Boston Matthews
Extruder, downstream equipment and complete production line for pipe and profile.
Products include single
Screw extruder and co-extrusion machine (0. 75to 6 in. )
Caterpillar takeout (rugged direct-
Drive machines such as Farris Puller)
, Automatic driving saw including servo
Drive model, rotary cutter, vacuum calibration tank, dry calibration device, spray bath and reel (single-and twin-shaft). C. W.
Blabander instruments.
Laboratory list
Screw Extruder comes in 0. 75-and 1. 25-in. barreldiam.
L/Ds from 10:1 to 30:1.
The extruder is easily attached to the company\'s plastic
The Corder torque flow driver or the preparation center driver can measure the processing conditions of various polymers. The 0. 75-in.
Independent table
The top extruder is a compact self
System with 1-1
HP motor and gear reducer. Twin-
Screw extruder in design including 42-
High-parallel spin
Shear micro composite design with output rate of 3. 6 kg/ hr;
A cone model with an extrusion rate of 42mm/hour for inverse or synergistic 20 kg, 17:1 L/D ratio; and 25-
Mm segmentedtwin-
L/D ratio screw extruder from 16:1 to 48:1.
There are a wide range of screws, molds and takeoff equipment to choose from.
Brampton engineering
Complete membrane blowing system (
Traditional and water cream)
Includes all components for turnkey installation.
Products include extruder, molds of various sizes and up to 10 layers, gas rings, IBCs, bubble cages, fixed tugs, vertical or horizontal oscillating tugs, pullers (
Center turret and surface)
, Fully computerized production line control, weight mixer, feeding system and l-
Flex meter control. Single-
Screw extruder for blowing film, pipe, profile, plate and wire/cable with 1-to 8-in. diam.
L/Ds to 40: 1.
Breyer maschinenfabrik gmbh offers a singleand twin-
Screw extrusion production line for paper, film, pipe and pipe. BRUCKNER INC.
Biax film stretch line for PP, PET, nylon, PS, PE, PLA and PVC.
It also provides professional LISIM simultaneous stretching system for pet and PP.
The Formtec business department manufactures extrusion equipment and production lines for rigid films and plates and provides CPP production lines.
The Bruckner ServTec division focuses on all customer service needs as well as machine upgrades.
The tech center also has a line that can be rented and extended at the same time.
Cable & pipe Solutions Limited
From Maillefer SA to provide a complete system for a wide range of plastic and composite pipes.
CARNEVALLI & ClA LTDA is a Brazilian manufacturer with complete blown film production line, flexo printer and recycling system.
CDL technology
Crown machinery divisionTwin-and single-
Screw extruder for paper, profiles and recycling.
Century extrusion DIV
See composite/hybrid systems for CPM.
Century/3 PLUS, llc div.
Century Company.
Multiple lines available
Screw \"ring extruder\" of Germany 3 extruder Co. , Ltd \".
The machine consists of 12 interconnected screws that surround a static core.
They provided it.
Mixing of pressure dispersion and distribution.
The resin outside the screw ring moves in one week, while the resin inside the ring moves in another direction.
Cincinnati squeeze
This Austrian company offers
Includes the alpha series, 45 and 60mm diameter screw extruder for general Profile extrusion.
Smooth, recessed or fine
Slot feed port.
A non-dedicated version of the Proton series for pipes, profiles and plates; 45 to 150 mm;
Smoothor slot with output of 66 to 3300 lbs/hour. Proton G-
Compact Torq series, Hightorque, direct-
Drive machine with low noise and 90-
Angle of lower barrel;
L/Ds from 30 to 36: 1. Twin-
Screw Extruder includes Argos parallel series of PVC pipe, profile and plate.
Argos EA series for PVC window profiles, 72 and 93 ram.
Konos cone series with outlet diameter of 38 to 72mm.
The FiberexT cone and parallel series for wood composites.
Six tapered models of 58 to 92mm with output up to 135mm lb/h and parallel units up to 2750.
Cincinnati extrusion also provides pipe molds for PVC and other thermoplastic plastics (Up to 800mm OD)
Complete system for fur PVC windows, other profiles and tubes.
The MILACRON extrusion system in Cincinnati offers the following extruder: * tapered counter-spin double-
Screw Extruder (
Size 35, 50, 55, 65, 80, 86, 92 and 96mm).
* Parallel pairs-
Screw Extruder (
Size 93, 115, 140 and 172).
* Coroting twins
Screw extruder for wood flour plastic composite materials (
Size 80, 100, 125 and 160mm). * Single-screw smooth-Drilling extruder (0.
75 to 12 in. ). * Single-screw grooved-Feed extruder (
45 to 150mm).
The company also offers custom screw designs for both single screwsandtwin-screw (
Many manufacturing and models for extruder)
, Advanced wear solutions for extrusion barrels and screws, reconstruction and renovation of gear boxes, after-sales services such as renovation packages and equipment upgrades, machine audits to increase productivity, on-site service technicians, control and repair of used extruder renovation and extrusion equipment training programs. CITSCO INC.
The new series of small extrusion machines are available for laboratory use and the production of Italian Gimac medical tubes.
The diameter of the machine is 12 to 44mm.
The screw and barrel are treated with nitrogen.
Bucket can have water
Cooling feed area. The 12-
The Mm model is 24: 1 L/D and the standard speed is 100 rpm.
CONAIR Company provides downstream equipment for pipes, tubes and profiles, including a complete extrusion system with product tools, dimensions, cooling, cut-off and products
Handling equipment.
Single Inline components include high
Strength Spray cooling tank for heat removal from pipe and heavy profile, MTand MTP vacuum sizing tank for accurate sizing of pipe and profile, MSVP calibration table, MCB
Coachman with buckle, location-
Based on servo rotation
Cutter and travel saw with optional servo Workbench stroke for precision cutting
Large profiles and wood composites.
MedLine puller/cutter with advanced servo drive and control technology can be provided for small extruder
Medical plumbing (diam)
Including ear and brain ducts)
Highest level of reliability and user accuracy-
Friendly operation.
Other professional equipment includes a servo-driven pipe reel, a dump truck, a take-out conveyor, and drinking water-
Straw telescopic machinery and wrapping paper. COPERION CORP.
Polymer Processing of the system according to Waeschlebulk-
From engineering research to a full set of turnkey facilities, handling knowledge and Werner & Pfleiderer process design.
Provide the corresponding order
Screw extruder and/or double mesh working together-
Spiral extruder for composite thermoplastic and thermosolid. (
Hybrid system. )
CORELCO manufactures downstream tools for mesh and bellows, including dual
Wall tube up to 10-in. in diam. CORMA INC.
Bellows or pipe system includes 12 standard modelsram I. D. to 3000mm O. D. pipe.
System generation orderwall,double-wall, triple-
Wall and rib tube for electrical pipe, car, medical, drainage, sewer and culvert, as well as rear cooler, hole piercing, split s, cuttingoff and high-speed winders.
Provide extruder with sewing wire. Also in-
Single sleeve systemwall, double-wall, triple-
Wall and rib tube.
COSTARELLI American company. Mono-
Layers and extrusion lines of the pipe, including a complete circulation system after conversion of 100%
60-consumer recycled plasticin. diam. drainage pipe.
Customized downstream systems (CDS)
The company designs and manufactures a full range of downstream machinery for pipe, profile and pipe extrusion applications.
The equipment includes cooling tanks and tables;
Belts, splints, tubes, plates, roll-ups;
Saw and cutter;
Embossed stand, brush/finish table, annealing table and cutter-punch units;
Tilt and collect the table and coil hoist.
Customize all production requirements from design to mechanical delivery and maintenance.
Offers a great selection of brandsName and custom
Manufacture replacement parts and provide renovation, maintenance and repair services for pre-preOwn equipment. DAVIS-
Standard film and coating system
Ability extrusion production line for blowing film, casting film and expanding film in single extrusion and co-extrusion system, custom design mold, screw and production line equipment for various products.
The extrusion coating and laminating production line produces flexible packaging, sterile packaging, liquid packaging, pipe laminating products and industrial products.
Production of co-extrusion tensile packaging, multi-layer packaging film, High
Barrier structure and relief film of 9 layers.
Production of Blown film system for bag, high-
Fast stretch packaging, multi-layer blocking packaging, and PVDC film.
CMR and EPIC control systems for single or multi-line control on new systems or modifications. DAVIS-
Standard LLC custom extruder for wire and cable, pipe, profile, medical pipe, sheet, blow molding film and casting film, blow molding film, elastomer, composite, extrusion coating, feed screw, recycling/recycling and fiber.
In addition, the high quality of the system
Fuse wire and cable-
Braun non-woven, high
Throughput BOPP, OPS and PET film.
Complete system including single
12-screw extruderin. diam.
Including slotbarrel, vented-
Barrel, reclinable, and tandem machine and vertical extruder to 3. 5-in. diam.
Downstream equipment for film, paper, stacks, pipes, profiles, fibers and composites.
Underwater ball production line.
Custom feed blocks, molds and other coextrusion
Equipment designed for paper and film blowing. Custom single-
Screw extruder from 0. 75-to 15-in. diam.
In L/Ds from 24: 1 to 48: 1, air-or water-
Ventilated or non-cooled versionvented.
Precision lab and
The small bench-top extruder can provide production equipment in a size of thousands of tons to complete the system with vacuum tanks, sinks, cheaters, hoists and cutting machines.
In a single reprocessing extruderand dual-
Diam, the configuration of the bulk density processing material from low to 0.
5 lbs/cubic feet to melts.
Multi-layer barrier film and plate co-extrusion system and customization-
Design recovery extruder to handle lowbulk-density scrap.
The range of blown film molds, rotators and winders ranges from one layer to five layers in sizes up to 86-in. diam.
For rigid PVC profiles, tapered and parallel double-
The screw Geminimachines is rugged and easy to operate and maintain.
The flexible PVC medical piping system provides an output of 1000 fpm; ultra-precise I. D. /O. D. ovality;
Screw design with high product definition;
And continuous superlow-Tension winding.
Epic III control contains dual
Thermocouple control and response shutdown
Loop control.
The graphical interface function controls the screen, trends, complete line documentation, data acquisition, SPC, and network functions.
Professional technical services, modernization of machinery and controls, and reconstruction of all extrusion items in custom packaging to increase production and performance.
Single Merritt line available
Screw extruder from 0. 75 to 12 in.
Including MM series (0. 75 to 1. 25 in. )
Heavy duty for medical and co-extrusion use and MX-
Work series with water or air cooling, three in one
Chamber feedback and stay-
Open clamp flange. Top-of-the-
Super Cool-MX line
High cooling extrudercapacity base-
Installation blower for maximum cooling efficiency. Low-
The cost Pioneer series is heavy-duty, air-cooledmodels.
Complete Black Clawson processing line for Fiat or embossed castfilm, stretch packaging, extrusion coating and lamination;
For film andtape and fiber. Single-
Screw extruder from 2. 5-to 12-in. diam.
Standard L/Dsof 24:1 and 30: 1.
Accessories include film and coating molds, primer and dryer, film hoist, unwinds, split s/re-wind and a co-extrusion system for casting film and extrusion coating.
All systems with microprocessor control.
Monitoring system can be provided. Pre-
The engineering products include the QFP extrusion coating and laminating production line as well as the general-purpose streaming film production line.
Suitable for quick installation and start-up-up. (
See composite/hybrid systems. )
Delta puller Machinery Co. , Ltd. Single-and twin-
Screw extruder for profiles, tubes, composites, blow molding, plates, recycling and wires and cables. Single-
The size range of the screw extruder is from 0. 75 in. to 8 in.
There are different l/D ratios. Twin-
The size range of the screw unit is from 65 to 135 and the L/D ratio is 23 or 33.
It\'s also a cooperative route.
Extruder, custom machinery and downstream equipment, as well as replacement screws and barrels.
Diamond USA
Single manufacturer
Screw extruder from 0. 75 in.
Up to 6.
New and reconstructed screws, new barrels, relinedbarrels and molds are also available.
The company also carried out the transformation and transformation of the extruder.
Dolci extrusion srl is a dedicated EXTRUSION line for casting PP film and stretch film, including high
Technology crowded togetherDROSSBACH N. A. INC.
Specializing in the production of extrusion machines and complete extrusion production lines for corrugated equipment for pipelines and pipes.
Double Helix systems
High manufacturing
High quality extrusion molds and equipment for film, pipe, pipe, coating and related industries.
Specialized in the production of multi-layer co-extrusion molds, feed screws and components.
The DSS mold divides the polymer flow from each extruder into two layers to increase productivity, improve film performance, and reduce waste due to reduced thickness tolerances.
Dead feedscrews arecustom-designed.
The company also produces up to 10 layers of barrels, mesh changers, stationary and rotating/oscillating blocks, molded cars, cylindrical and stackable diesel (
20 layers using DSS layer technology).
The mold adopts DSS K05 melting to eliminate the fracture coating, which has a friction coefficient of four times lower than that of conventional chrome plating or nickel plating.
The DSS K05 can also be adapted to existing molds, feed screws or any component that benefits from a low friction surface.
Electric extruder
Maximum line of twins
27-screw extruder
The 133mm has six different sizes and is combined with a variety of tools, downstream, production monitoring and process control equipment.
With high throughput and wear-resistant components, the extruder can add high grinding materials in the shortest downtime.
Turnkey production system provided
Screw extruder and assembly.
Main natural fiber extrusion-
Plastic Composite material (wood decking)
Other markets, including food and medical applications.
Turnkey expertise helps to build a complete factoryExtensive operation.
EnQuest Limited.
Lines include vertical and Verta-
Turret extruder for extrusion and stripping;
6-fully extrusion systemin. diam.
For wire and cable insulation and sheath with thermoplastic, thermofixed and fluorine polymer compounds, as well as foam/coaxial extrusion; fiber-
Extrusion coating production line;
Single-layer and multi-layer sheet lines with a rolling width of 42 in. ;
Spiral hoist for hose reinforcement
Double Take-automatic crossingUps and reel machines;
Patent double flyer payment-offs; shaftless pay-offs and take-
Capacity of 30,000; dual-
Drum, belt packaging or open hoist of hoist;
Heavy Caterpillar
Application;
Insulation patch machine;
And re-system
Reeling wire, reco roll, length measurement and spark test.
Provides Complete line layout, stand-alone machine layout and practical connections, as well as complete interconnect drawings with numbers, sizes and all terminal connections. ESI-
Extrusion Service Co. , Ltd.
Design and manufacture downstream extrusion equipment and systems for automation.
The product line includes servoand air-actuated fly-
Knife for fixing and marching cutting
Off saw, Accupunch on-line manufacturing unit, lead for smooth and cut, conveyor belt and blow
Vacuum sizing tank, hot
Water annealing and vacuum calibration tank, spray and flood-cooling tanks (
Conveyor belt included), wind-
Automatic stacking, drilling and wiring equipment in straight columns, surface treatment equipment (palletizing)
Equipment and customizationbuiltequipment. ESI-
Extrusion services complete engineering line system services including all extrusion equipment, overall line engineering and layout, online
On-site installation supervision, operation of tools and equipment-
Start and train. FACTS, INC.
Distribution of extruder, mold and downstream equipment for pexpress and in-
Floor Heating from APSwissTech, Switzerland. Facts Inc.
Extrusion control systems are also manufactured. FARREL CORP. Custom-Design, heavyduty single-
Screw extruder for homogenization and extrusion in the form of bars, strands or pellets.
Specialized in large machinery and equipment up to 26 unitsin. diam.
Productivity up to 60000lb/hr. Hot-
Cold-melt extruder
Feed extruder and machine accept emissions from batch or continuous mixer.
The low density polyethylene extruder with vent for devolatile has also been modified. FLENDER CORP. Offers A-Line single-
Screw extruder from 2. 5 to 10 in. diam.
High torque and low noise.
Motox is also available-N drive motors.
Future design companySaturn dual-
The lip air ring is equipped with an interchanging set for molds starting from 0. 5 up to 100 in.
New foam taxi guide system and new escort transport-
Shut down the system with low system
Pre-breathing mold, fixed and oscillating mold base, mesh changer, gas bubble cover, bubble width control, extruder, feed screw, air-
Top bearing and Teflon folding frame
Anti-clamp assembly and surface hoist.
The ethical Elettrotecnica srlcorona double of the US agencyside treaters.
Engineering, planning, service and reconstruction of the equipment, as well as several Saturn projects: the Saturn upgrade project and the Saturn air exchange project.
Ghioldi srl production order
And muitilayer blown film line up to seven layers, as well as single
Multi-layer casting film and extrusion coating line.
Compact blow making is also available
Membrane line of tubular PE film and bubble package. G. F.
Goodman & Sons
Downstream machinery for pipe, pipe and Profile extrusion from less than 0. 010 to 8 in. O. D.
Vacuum included-sizing, spray-
Cooling water tank. Range of pinch-
Roll with sync and Caterpillar CoachmanPull double-
Double sided timing belt drive with-c and d-
Servo motor and drive system. On-
Rotary cutter for demand, electric, pneumatic, heavy
Electric Hydraulic, Vac-U-
Torq vacuum clutch/brake or servo system and used in-andoff-line.
Travel saw On-
Wire cutting with rigid extrusion.
Tool and car driver can combine custom engineering system according to specific requirements.
The discharge conveyor with or without air injection can sort the cutting length.
Full bondabelretreat Caterpillar belt for any brand or model puller.
Greiner extrusion, USA
Downstream tools for PVC windows, fences, decks, foam profiles and plates, calibration, guillotine cutting and cooling equipment. HARREL, INC.
Small and medium-sized-size single-
Screw Extruder (to 4. 5 in. )
Digital Drive (accurate to 0. 001%)
And digital microprocessor control.
Geartruders is a combination of extruder, high
Precision Gear pump, digital drive and digital panel microprocessor controller operated with extruder and gear pump.
A complete pre-packaged extrusion system is specially provided for pipes, profiles and plates.
The patented tubtrol system controls O. D. and I. D.
Pipe or pipe of any size or style, whether single or multi-cavity, straight or raised pipe.
The Sheetrol system controls the machine direction and cross-machine profile of the extruded sheet.
Companies with downstream accessories include Rollerpullerno-clutch (servo driven)
Cutting machine and classification conveyor line.
Complete blown film system from single layer to 9-fine Chuan Alpine Americalayer co-extrusion.
The extruder sizes range from 50mm to 120mm with an output of 1700 lb/hr.
The typical resin operation is PE, paste, pe evoh, EVA and PA.
Horizontaloscillating nip and optimized thin film winding machine can produce high quality rolls of 60 in. O. D.
Up to 140 in LFW.
Two automatic thickness control systems are available: POS and AutoThermfree film.
POS is suitable for re-installation on existing lines.
Offers movie enhancements with new machine directions Orienter.
The packaging film facing the direction of the machine provides additional barriers, stiffness and film convertibility, as well as many additional film enhancements.
The company specializes in turnkey installation.
Hpm a taylor\'s CO.
Fully customized single
1 screw extruder. 5 to 15 in. diam.
In L/Ds from 12: 1 to 50 \"1, air-or water-
Cooling, ventilation or non-ventilation of plates, pipes, profiles and tubes
Accelerate color blending, recycling and waste recycling. In-
Design and manufacture of domestic feed screws for patented Wave (
Double and triple)feedscrews.
Custom Sheet extrusion system of various thickness (up to1. 5 in. )and widths (up to 33 ft)
Four different styles
Multi-layer barrier sheet system with up to 11 layers.
Multi-roller sheet line system--36 in.
Roll everything up. High-
Output sheetline system up to 15,000/hour.
High PLI system (to2500 PLI).
The system provides three standard functions
Roller verticality with multiple rollers, horizontal fixed positions or with first and third rollers of the track (patented).
VHSL system for thick film [degrees]
Multi-roller clamp system and three-rollerroll (top/bottom)
Rotary impression system. EPM PLC-
There are mainly 17 monitoring systems based on distributed IO.
HMI and redundancy 12 in. PC controls.
Complete system documentation and graphical interface for control.
Remote Access and viewing. In-
House truck transport and installation personnel for turnkey applications.
There are scrap and recovery extruder with cutting edge feed section, tamping machine feed unit or ram feed unit.
See composite/hybrid systems.
PCM series of Ikebukuro American company, Highspeed twin-
The screw extruder uses adjustment screws.
Buildings for barrels-
Make the L/D ratio easy to adjust.
The screw can be coroting or reverse. rotating. Screw diam.
From 29 to 125mm(
See composite/hybrid systems. )
Information and catalogue of Italian extrusion and extrusion production lines of tubes, profiles, films, flakes, filaments, bundles, tape, ball and cable coatings by the Italian Trade Commission. Single-or twin-
Screw Extruder size from 1-to 10-in. diam.
L/Ds for 12: 1-35: 1.
JDP Manufacturing Company
A wide range of downstream extrusion equipment for pipes, general profiles, window profiles and plastic fences.
For PE, PVC, CPVC and other extrusion pipes with products, 54 can be inserted into them. O. D.
Pipe Size: vacuum-
Water tank, water tank, water tank
Recycling system, coachman, saw, guillotine, reel, dump, custom processing machine, bellers of two solvents-
Weldand Reiberstyle gasket.
Vacuum for window profiles and fences-
Calibration table, vacuum tank, cooling tank, coachman, saw, combination of Coachman/Saw, dump table and packing table.
For general profiles, the company provides vacuum tanks, cooling tanks, water-
Recycling system, car driver, saw and custom machine. KIEFEL INC.
9-blown film extrusion system
Layer structure of high density polyethylene, MDPE, low density polyethylene, llo, EVA, Poly, PP, nylon, EVOH, PET and Mao metal.
Single complete system
Or multi-layer blown film, with excellent film strength and uniform film thickness or rolling quality.
Extruder can be slotted-
Feed from 30-or smooth holesto120-mm diam.
Mold size from 80-to 900-mm diam.
Single or twin air rings.
120-internal bubble cooling on the mold900 mm.
Stable bubble cage of various sizes. Take-
Stationary or oscillating;
The hoist can be either surface, center or gap.
Max\'s takeoff and winderswith
Flat width of 8003600 mm.
Accessories include mixer, air cooler, processor, web Guide, gravity extrusion-
Automatic Horizontal control systemdirectiongauge-
Profile control system and plane-
Width control system. Trade-
And reconstruction.
Full turnkey facilities.
The company is part of brunkner.
STEWART elco stewart bolling, INC.
Make Steel on behalf of Kobe and provide heavyduty, single-screw, hot-
Meltand composite extruder with screw size 31/2-to 20-in. diam.
, L/Ds to 30:1, gear pump extrusion system.
The extruder can be heated by electric or steam or oil, or it can be cooled by air or water.
Various molds and tools. (
See composite/hybrid systems. )
Krauss maffy
Double Spin
Twin Screw Extruder
Taper and parallel
Screw configuration for PVC extrusion of pipes, window lines, wall panels, custom profiles, fences, etc.
Parallel lines have a ratio of 26 L/D for high specific output rates and improved melting quality. High-
Stock plumbing tools, vacuum and spray tanks are available.
The control includes the C4microprocessor system for control of the entire extrusion line.
The company works with window tools and downstream suppliers to provide a complete system. LEISTRITZ Twin-
Screw extruder and system for compound, reactive extrusion, devolatile, foaming and direct extrusion. Screw diam.
18 to 140mm
Segmented barrel/screw.
Control architecture provided according to customer specifications.
Longmon machinery (USA)INC.
Available including zipper profile extruder, flexo printing machine, T-
Shirt and trash bag curling machine.
March North America
The company provides complete single-layer to 9-
Layer blowing and casting film extrusion system including automatic gauge mold, traction device and surface collecting wind, including all permanent
Magnet, synchronous motor.
Macro Engineering Technology Co. , Ltd.
Advanced blown film and cast film extrusion system and coextr system for printing, lamination, barrier and special film.
Customization, coating and web-
Handling equipment.
Maris, USA
See composite/hybrid systems.
Marubeni jsw Composite Technology Center
Rotor, continuous melting mixer (CIM)forhigh-
Composite strength.
A pair of twins.
Rotor type, the basic concept is similar to Farrel continuous mixer;
The other is twins.
Screw compound extruder (DSM)
Built under the authority of Krauss-Maffei. (
See composite/hybrid systems. )
Merritt extruderSee Davis-Standard LLC.
The die width of the single-layer and multi-layer streamer film and two-way orientation line of Mitsubishi Heavy Industry in the United States is 5800mm.
Standard single
Screw extruder in 65-to250-mm diam. ;
Special Single
Unit mixed extruder (withhexagonal-
Bucket mixing section)of 50-135 mm.
Series extruder from 90/115 to 300/350;
Pair rotation, cone double-
Screw extruder for 50 and 60mm PVC;
Double Crown-
45-screw composite machine125mm. (
See composite/hybrid systems. )
NFM welding engineer rotation in the opposite direction, nonintermeshing and head count, iutermeshingtwin-
Screw extruder for compounding, reactive extrusion, devolatile, latex conversion and rubber dehydration and drying. Also single-
Screw recovery extruder for fiber and film. (
Hybrid system. )
Norwell plastic Co. , Ltd. Positive-
Gear pump with displacement output from 0.
06 to 41,000 lb/hr, viscosity to 20 million cp, accurate measurement of polymer to mold, elimination of mold pressure changes, increase production, reduce waste and improve product quality.
Size 1-manual screen replacement6 in.
Features multi-location processing to avoid interference and allow better operator access.
Hydraulic mesh changer with size 2. 5-15 in.
Screen changes allowed-the-
Fly at full extruder output to minimize downtime and Labor.
Continuous screen replacement allows automatic screen replacement without interrupting productivity or product quality.
Customized Olympia Machine Tool Co. , Ltd. Single design
Specializing in medical pipe, wire insulation, profile, high-
Temperature, fluorine Polymer Extrusion and traditional materials. Sizes from 0. 75-to 6-in. diam.
L/Ds from 20:1 to 30:1.
The control panel can be a floor-standing(HXTA)
Or hidden under the extruder barrel (CP).
Manual or automatic-
Cooling friction control, selection of gear drives, instruments and drives with oversized thrust bearings and meeting jic-type standards.
Optional sink, cash register, pick up, conveyor belt, cross, straight
Delivery head with or without Inconel surface, heating fixture, casters, level Jack, double barrel and flame-
Hardened type of Harbin or tungsten chromium cobalt alloytipped screws. Barrier, two-
Stage fees and other custom screw designs are available.
Omipa spa provides a complete extrusion system for sheet, film and hollow profiles, including dedicated molds for hollow PC panels.
Parkinson technology
Parkinson\'s disease is now the main corporate identity in three major product and technology areas: Marshall and Williams plastic, Parkinson\'s windmill and key filters.
Plastic orientation and casting equipment under the brand Marshall and Williams includes complete production lines and separate processing and orientation systems, as well as orientation pilot laboratories.
The winding equipment of the winding machine includes personal, roll-opening, and auxiliary equipment.
Production lines for key filters include manual, hydraulic and continuous melting-
Filter replacement.
Phillips science
Ram Extruder for the production of ePTFE or umw film, tube or rod.
Plastic comp, INC. Builds in-
Direct composite line extrusion production line for continuous, long-
Glass profiles of \"push\" DLFTprocess using wood shed technology.
Marketing Services for plastic equipment
Used for production and laboratory scale extrusion systems for blowing film, sheet, profiles, pipes and composites. Extruders in 0. 5-to 6-in. diam.
, And complete the downstream peripherals.
Also rebuild the extrusion equipment used.
Waste Recovery line with waterring granulator from 2-to6-in.
Single pipe corrugated systemand dual-
Use the walls of the vacuum and blow system. POMINI INC. Single-
Screw composite extruder for Heatand cold-
Feed from mixer or reactor. Hot-
The feed extruder receives the material from the reactor and delivers it in granular form.
The range is 12 to 16. with max.
Throughput is LB/hour. Cold-
Feed extruder for cubes generallyor pellet-
The Federal Reserve ranges from 6 to 15. with max.
Throughput is 14,000 lbs/hour. Mixer-
A feed extruder located under a continuous mixer or internal mixer produces pressure to pump the material through a ball mold.
The range is 2 to 20. with max.
Throughput of 70,000/hour, with or without ventilation.
All extruder can be equipped with four versions of the granulator: underwater, dryFace or stockhead. LCM-
AX, continuous mixer and double-
Screw extrusion technology isstage, axial-
A discharge motor consisting of two leather and inter-grid screws with central part features. Typical profile of rotor blades of rotor (
Long continuous mixer). CUSTOM-
Design extrusion production line provided (
See composite/hybrid systems. )
Trident single-PTI/Processing Technology Co. , Ltd.
Screw extrusion system for composite, pipe and profile, co-extrusion, film and plate, single and series foam plate, fiber, wire and cable, recycling and extrusion ball.
Complete system from 1 hole size. 5 to 15 in. diam.
L/D ratio from 7: 1 to 48: 1. Heavy-
Duty custom extruder with air-or water-Cooling system; right-hand, left-hand,or tuck-
Under the driver configuration;
High discharge barrels or non-discharge barrels
Design performance of screw;
And the standard computer control system, or the company\'s Titan integrated PLC/computer control system. High-
Standards for various materials, gauges, widths and finishes and performance Trident sheet extrusion systems for custom sheet production.
The system provides functions such as vertical, tilt, or horizontal scrolling
Bracket configuration, three
Roller standard or multi-roller device with roller temperature adjustment system; mono-
, High speed rate of co-extrusion or laminated network structure options and high performance options.
The system is specially tailored for the application.
Trident muitipak extrusion system for multi-layer container extrusion blow molding provides custom control and mechanical configuration, multi-aperture combination and low hole size combination
Melttemperature feature feeds. Trident dual-
High diameter extruder
Performance mechanical properties of foam and film waste, single-or double-
Special hopper and feeding section arrangement, and two-
Workpiece barrel and screw assembly for easy disassembly.
Support system including provident fund Trident water
Ring granulator, CCF crammer feeder and RAM feeder, intensive washing and drying system, water filtration and treatment station and bulk storage equipment. (
Hybrid system. )
RANDCASTLE extrusion Systems Co. , Ltd. Single-
Screw workbench and floor extruder for laboratory and R & D applications.
Features include cycle mixer with doubleThread performance;
Interchanging feeding section;
Drain and drive screws continuously.
It can be used for complete system of blowing film, casting film, fiber, paper, devolatile, composite ball, monofilament and reactor pump.
The co-extrusion film and sheet system provides up to 7 layers, and the co-extrusion film system provides up to 11 layers. Viscomon-
Line analyzers and laboratory services are available.
RDN Manufacturing Company, INC. Post-
Extrusion equipment for pipes, tubes and profiles, as well as complete turnkey production lines with mold development and operator training.
Individual components include mold, vacuum ruler, water bath table, airtables, belt pull pul, wheel pull pul, relief, travel saw, server and dump table.
REIFENHAUSER
The blown film extrusion system and components include from-to 10-in. diam.
Have or do not have IBC, bubble stable cage and multiple collapse flame types as well as oscillating nip-
Roll Group with horizontal turning rod.
Winding technology up to 60in. rolldiam.
Forward/reverse wind direction with automatic
Switching and rolling transfers.
Complete North American manufacturing control system (Reicofol)
And automatic thickness control (
Split Air ring)
The change of instrument is improved.
Barrier Film and flow extension film extrusion system of high quality PP. ROLLEPAAL INC.
Downstream equipment includes tools for the production of plastic pipes, vacuum and spray tanks, cheaters, knives and process control systems.
Parallel pairs of spin-
Screw extruder for pipe with capacity of 3000-plus lb/hr.
Features include fast start-up, parallel screw design, high torque, high back pressure (9000 psi)
And static hydraulic thrust bearings.
Rosendahl nextrom Technical Manual and microprocessor-
Fiber optic control wire and cable-
Optical and tube extrusion systems include dual
Flyer payment, payment Station, NM series
Fixed and manual centering cross, in and out of caterpillars and winches, multiple
Vacuum through cooling trough
Calibration slot, double automatic reel machine, single automatic and double automatic pick-upups, take-
And wiring machinery.
Options include diameter, capacitance, temperature, elongation, and synchronous control system.
The MPL 32 system is suitable for pipes and tubes for automotive and other engineering applications involving single-layer, multi-layer and shrink materials.
The system starts to produce tubing from 0. 16-to 1. 26-in. diam.
Between 20 and 394 feet/minute.
MPL 10 produces medical and professional tubes from 0. 04-to 0. 4-in. diam.
PVC, polyurethane, nylon and PE are included.
Output from 98 to 984/min.
Royle Systems Group manufactures a full set of turnkey systems for telecom, power, automotive, optical fiber-
Fiber optic and other special cables.
Product line includes payment, accumulator, extruder, cooling tank, winch, pickingups, computer-
Control systems and technologies. Fiber-
The optical product line includes: drawing Tower, Strength tester, coloring machine, Color Belt machine, secondary coating line, stranded line and protective line.
SML Extrusion Technology Co. , Ltd.
Full-featured coex casting
Thin film line for LLDPE breathable film with one-way orientation.
Sleeves are also provided
Touch polishing technology for high definition film licensed from Chiba machinery industryof Japan. SUPERIOR-
MPM Technology Co. , Ltd. Single-and twin-
Screw Extruder, including complete system prediction and blowing film, plate, coating, extrusion coating and lamination, profile, composite and film and plate facing machine direction and two directionsaxial. High-and low-
Boy costume and custom design.
Complete lines include Hopper with patented features, filler, mesh changer, film and sheet mold, gas ring, oscillating nips, hoist and unwinds
PendingZip knife splicing/transfer system, cutter, coachman and granulator. Re-
Engineering and remanufacture of existing equipment.
TECHFLOW Design & Manufacturing Co. , Ltd. Builds high-
Technology Film blowing line (
Including co-extrusion type)
Working with Giovanni zoki of Italy.
TECHLINE Extrusion System Co. , Ltd.
Complete extrusion system for blowing film (
Width of 10 to 160. )
For low density polyethylene, llannan, high density polyethylene and up to five-
The layers are crowded together. Custom-
Engineering components include single
Screw Extruder (
For film, streaming film and Profile extrusion)in diam. of 2 to 4. 5 in. ;
Replace the screen manually; screws; single-
Spiral blowing of layers and layers-
Thin film assembly with diam. up to 60 in. ; internal-bubble-
Cooling system and highoutput dual-lip air rings; rotators; take-
Folding Assembly; high-
Speed automatic surface and turret winding system with in-
Line, 160 network width. Uh, roll. to 60 in. ;
Fixed or adjustable tower; control panels; film treaters; post-gusseters;
And any additional auxiliary equipment/replacement parts.
Customer Engineering, update and planning services.
Italian company TECNO coating engineering company is five-and seven-
Layer barrier film for meat packaging.
Thermal Fisher science material representation prism double
The screw extruder adopts the design of segmented screw configuration and modular split barrel, which can meet various polymerization processes.
For precise control, each barrel segment is heated and cooled separately.
Plastic Engineering Company
Extrusion and co-extrusion machinery for wire and cable, optical fiber, profiles, industrial/medical tubing and composite/granulation.
The range of the extruder is from 0. 75-to 2. 5-in. vertical and 0. 75-to 6-in. horizontal. Cast-
The feeding section includes generous cooling core and round-cut feeding to facilitate the feeding of particles or powders.
Feed screw with custom design.
Thrust bearing with rated working life of more than 10 years.
The barrel is double lined.
Special L/Ds and high-
Temperature machinery can be provided.
Upstream devices include payoffs, dancer/accumul, concentric strap heads, and fiber-optic tie heads.
Downstream equipment including sinks (heated/chilled),capstans (wet and dry), takeups (
Double or single reel)
Machine, machine, machine, granulator, mold and clamping roller.
In addition, cable machinery including single machineand double-
Flowers caners and respoolingquipment.
Complete production line such as fiber-
Optical cast light with optional PLC, tugging line and Reassembly line-
Based on computer control.
All systems for custom design. (
See composite/hybrid systems. )
Theysohn extrusionstechnik Co. , Ltd.
Turnkey solutions are provided, including automatic material preparation units consisting of material weighing, mixing and storage systems, and extruder feeding systems.
Also complete the extrusion line with pairs of twins-
Screw extruder for various rigid pvc products such as pipes, plates, profiles and siding.
Tomi Machinery Manufacturing Co. , Ltd.
Blown film system with 40-extruderto 125-mm diam. and diediam. of 20-1200 mm.
The traditional upward
Extrusion version with rotating mold and air ring, down-Squeeze out water
Automatic roller change, computer control, printer, slit-bathtub system, optional co-extrusion
Sealing Machine, corona processor and bag making machine.
There is also an extrusion lamination system.
Troster Machinery Co. , Ltd.
Rubber and TPEs special extruder for wire and cable, flexible profiles, hoses, washers and belts.
Joint Precision singleand twin-
Screw extruder for blowing, casting, stamping, paper and coatin/laminated andMDO and complete process and auxiliary equipment (
Machine orientation)applications.
Simple single and co-extrusion film blowing moldflow, polymer-
Flowtechnology for production lines, bubble cooling control inside the bubble tracker, and integrated controls and hardware.
Custom Machine builder for upgrading, rebuilding, or integrating network devices to enhance the production capacity of existing processing.
Vico researchSingle-
1-screw extruderto 8-in. diam. Grooved-
High Density Polyethylene film extrusion feed up to 4-in. diam.
Cone screwdriver for film recovery and crammer feeder.
Turn-key production line for blowing film and bellows. Also in-
Production line equipment.
Waken machinery
Downstream extrusion equipment for pipe, profile, sheet, profile and custom processing applications.
Pipe and profile equipment includes complete turnkey system, fully automatic cutting and transfer system, conical tube and belt tie rod
Demand or continuous mode flight
Cutter, fixed or traveling saw, discharge conveyor, automatic custom machine, multi-pass/multi-axis cooling and precision vacuum tank.
The paper equipment includes small paper production line, beating conveyor, fully automatic cutting and transfer (turret)
Automatic stacker, fixed or mobile crossoverline and edge-trimsaws.
Stock processing equipment line (
Between the extruder mold and the granulator)
It includes a quick cooling but Bath, a vacuum/blower water removal device and an auxiliary stock drying rack.
The Industries served include automotive, medical, packaging, resin and strapping.
Warner Sales Associates
Complete blown film extrusion line for Carnevalli with 40-to120-
Mm extruder for LLDPE, low density polyethylene, high density polyethylene and co-extrusion.
Wayne machines & molds
Custom yellow jacket linebuilt single-
The range of screw extruder is from 0. 38 to 8 in.
L/Ds up to 36: 1. U. S. -
Built-in 19 to 50mm, 36: 1 dual-grid collaboration-
Screw extruder for laboratory and production applications.
Horizontal, vertical, floor-mounted, table-
Top and co-extrusion models.
Complete system for pipe, sheet, composite, Rod, wire, blow film, flow film and extrusion pressure test with optional microprocessor control.
Complete co-extrusion system for all process types.
Sheets and casters
Off within 8 to 24 minutes.
2-wide, granulatorand 3-in. wide.
Laboratory and production-film towers.
Customize the new and rebuilt screws and barrels from 0. 25 in. to 6 in.
Suitable for all models of extruder.
Professional high-
Temperature, corrosion
Fluorine-resistant polymer extruder and screw/barrel modification of existing extruder to run engineering plastics. High-
Torque vertical and table-top production-
Rated extruder with double
A speed-down spiral gearbox with shaving, grinding, and hardened gears, not a worm or wrapped Worm Gearbox.
It is said that the screw box is more effective than the worm type, so as to better transmit energy to the screw, reduce the waste energy of friction converted into heat, and wear less than the worm type gear. Table-Topunits Month Day. 25 to 1. 25 in. ;
Vertical singlePost unit in 0. 25 to 1. 5in. ;
Vertical double
2 and 2 job units. 5 in. Custom-
Servo and d-included-
C. pullersand cutter.
Customized vacuum tanks, sinks, air stripping devices and molds for blow film, paper, cast film, strands, tubes, wire insulation, wire coating and other applications. (
See composite/hybrid systems. )
WELEX is suitable for sheet, composite, profile, pipe and most applications, high
Performance sheet-
1 screw extruder. 25-to 10-in. diam.
L/D ratio from 24:1 to 40: 1.
Enclosed direct coupling or belt drive
Circulating liquid or high-capacity air cooling, as well as standard or automated process control systems. Sub-
Supplied with assembled extruder.
A complete sheet extrusion system is specially provided and a roll stack configuration suitable for all sheet applications is provided. Take-
Off includes silent chain drive, single roller drive, all gear drive and unistack multi-position roll stack. Also in-
High-line system
Heat forming of volume;
A extruder with a modular feed block for new and existing extruder;
The extruder panel for the new extruder is integrated with a gear pump for the control device, or as a free fit-Station board.
Options include changing the screen, mold, gas knife, anti-static bath, scissors and hoist.
Maintain complete stock of spare parts.
The on-site service team assists with customer needs.
Wilmington Machinery Co. , Ltd. Single-
Screw Extruder, co-extrusion and extrusion system specially needed. Bore diam. from 1.
25 to 12 in;
L/D ratio between 20: 1 and 48: 1.
Computer control has customized software, equipment and process diagnostics, SPC and auxiliary equipment control.
Special base for multiple extruder or special height and installation.
Oudemler company
The range of Varex film blowing lines ranges from single to nine layers, from 2 to 6 layers.
The Varex line includes internal bubble cooling; grooved-Feed and smoothfeed throats;
Barrier screw technology;
Oscillation traction;
And surface/center/clearance turret hoist, or a combination of three.
Film lines cast by Filmex for PR stretch and special film can squeeze single-layer and multi-layer films to nine layers, but additional layers can be obtained by adding joint mold feed block technology.
The equipment is designed for working width of 55 to 130.
The film thickness is 0.
4 to 12 mil and maximum yield of 3300/hour.
In addition to the standard mold from 4. 7-to 49-in. diam.
The company provides itsOptifil P2 automatic film blowing mold in diam.
From 6 to 35
Formonolayer and three
Layer film, 16 to 20 pieces. for five-, six-andseven-layer films.
Optifil P2 mold control lateral
Automatically measure the direction to produce lateral
The direction tolerance is close to the tolerance in the direction of the machine.
Optifil P2 automatic mold helps reduce start-up
Time and raw materials
Material consumption, while making the film with increased flatness and minimum curvature.
The Optifil P2K automatic air ring is also provided for the new line, or a suitable air ring is provided for existing equipment.
The latest innovation of Optifil Pfamily is the Optifil P3 thickness contour control system (
Upgrade from p2 system)
Designed for high
Output blown film line.
XALOY extrusion supply is positive
Gear pump with displacement output from 0.
06 to 41,000 lb/hr with a viscosity of 20 million, accurately measure the polymer in the mold, eliminate pressure changes in the mold, increase production, reduce waste and improve product quality.
Size change screen manually from 1-16 in.
Features multi-location processing to avoid interference and allow better operator access.
Hydraulic mesh changer from size 2. 5-15 in.
Screen changes allowed-the-
Fly at full extruder output to minimize downtime and Labor.
Continuous screen replacement allows automatic screen replacement without interrupting productivity or product quality.
Xtrutec engineering provides a wide range of laboratory plastic processing equipment manufactured by Labtech Engineering, Thailand.
Product line includes-
Screw Extruder (
20, 25 and 30mm); twin-
Screw Extruder (16, 20 and 26mm); pelletizers;
Filter Testing Machine; take-
Off system for blowing film, streaming film, thin film and monofilament; mixers; presses; blowmolders; and two-roll mills.
Before the equipment is put into use, laboratory services for testing materials can be provided.
The company also provides consulting and equipment services.
Colfax corp, a top pump business machine. PEP-
Series II gear pumps act as a booster/stabilizer at the discharge end of the extruder and are used to accurately inject additives into the extruder barrel.
Through constructionhardened, high-
Speed tool steel or 400-
Series of stainless steel for corrosion and wear resistance. PEP-
Low Gear Technology Utilizationaspect-ratio crowned-rootgears.
L/D ratio is 0. 75 vs.
Industry standard 1.
Month for helicalgears, gas
II ensure that the polymer has a smaller travel distance by reducing tooth fluctuations.
The Crown root is parabolic
Shaped cutouts that provide less resistance to tooth evacuation flow and further teethPulse reduction.
According to the company, crownedroot and low-
Compared to the traditional design, the aspect ratio drive provides excellent extrusion performance, excellent mechanical integrity and higher efficiency.